| home | updates | download | manual | documents | feedback | search | ITS more |
|
nvserv=host MountOption
nvserv | nvserv=host -- forwarding to a name based virtual server
specify MOUNTing the target server as a name based virtual hosting server.
The virtual host name to be sent to the server can be specified as
"nvserv=host" or it is the host name part in the rURL by default.
With this option, the target server is MOUNTed only as a virtual server of
the host name while other servers, of alias names of the host
or IP-addresses of the host, are not MOUNTed.
This means that the MOUNT rule will be applied for rewriting of URL in a
HTTP response message only if the hostname of a URL matches textually with
the virtual host name of the target server.
The virtual hostname from the client can be passed through to the server
with "nvserv=-thru".
avserv | avserv=host
-- forwarding to an IP-address based virtual server
notate that the target server is not a name based virtual hosting server.
With this option, all of servers of alias names or IP-addresses of the target
server are MOUNTed by this MOUNT rule.
It has been the default behavior of MOUNT but it can be changed with the
option HTTPCONF="nvserv:auto" to automatically detect
virtual servers in a set of MOUNT parameters.
This "avserv" option could become necessary to notate a non-virtual
server which is automatically guessed as a virtual server.
rserv=host[:port] -- real target server
specify the real host name or IP-address and port number of the target
server toward which the HTTP connection is established.
This option is used to do MOUNT a virtual hosting server of which virtual
host name is specified in the rURL rather than in the
"nvserv=host" option.
For example, the following two MOUNT rules are equivalent to each other.
MOUNT="/v/* http://www.domain/* rserv=192.168.1.123"
MOUNT="/v/* http://192.168.1.123/* nvserv=www.domain"
Specifying the "rserv" option implies that the target server is a virtual server as if notated with the "nvserv" option. genvhost=host
(obsoleted by nvserv and rserv options)
Specify the hostname which will be received by the target server
as its virtual hostname.
It is set in the "Host: host" field in the request message to be
forwarded to the server.
When the request is to be forwarded via a HTTP proxy, it is set
in the request URL as http://host/...
The default Host field sent to the server is derived from the
rURL
part of the MOUNT parameter which specifies the target server.
For example for MOUNT="/* http://hosti:8080/*", "Host: hosti:8080"
will be forwarded to the server (which is running at the port hosti:8080).
To through pass the Host field in the request from a client to the server,
specify as "genvhost=-thru".
MOUNT="/v/* http://www.domain/* rserv=192.168.1.123"
MOUNT="/v/* http://192.168.1.123/* nvserv=www.domain"
Specifying the "rserv" option implies that the target server is a virtual server as if notated with the "nvserv" option.